FTS
KO
EnglishFrançaisDeutschEspañolItalianoPortuguês日本語한국어简体中文العربيةहिन्दी
Cerise 구매

CERISE / FTS

다운로드

펌웨어와 문서를 한곳에서.

안정 / 프로덕션

실제 현장 사용에 권장되는 채널입니다. 업데이트 전에 사용 중인 모델과 호환되는지 확인하세요.

안정 / 프로덕션

1.8.11

이 채널의 최신 버전

Cerise 1.8.11 · UF2 모든 Cerise 모델 · 4.32 MiB
SHA-2564d44e108073011b20612cd438c5fe17fd50d12ec80e98c51e6ec19b3b9105881
안정 / 프로덕션

1.6.4

이전 안정 버전

Cerise 1.6.4 · UF2 모든 Cerise 모델 · 1.87 MiB
SHA-2563eafb396cce3955de30a0ed40b2e44051ab1594648cb8b327b37878d97807078

사용자 설명서

모든 장을 담은 전체 가이드를 오프라인으로 볼 수 있습니다.

PDF · 한국어 온라인으로 가이드 읽기

Cerise 업데이트

설치 전에 업데이트 안내를 읽고 사용 중인 모델과 호환되는지 확인하세요. 펌웨어 파일은 이 웹사이트에서 직접 제공됩니다.

업데이트 방법

전체 변경 내역

버전별 변경 사항과 관련 글(있는 경우).

릴리스 노트는 영어로 제공됩니다. 확인되지 않은 날짜와 채널은 표시하지 않습니다.

안정 / 프로덕션

1.8.11

  • Overhauled Art-Net and sACN protocol conformity:
    • Per-port ArtPollReply.
    • Persisted ArtAddress.
    • Product-specific OEM IDs.
    • Stricter sACN validation.
    • CID-based merge tracking.
    • Synchronization support.
  • Fixed DHCP issues.
  • Added DHCP hostname advertisement derived from the configured Cerise name.
  • Changed the default merge mode for new and migrated slot patching from LTP to HTP.
  • Changed the default USB IP address to 172.30.0.1.
  • Restored the normal LED blinking pattern introduced in 1.8.1.
  • Fixed channel blocking settings not being saved in 1.8.10.
  • Many bug fixes.
  • RDM remains a work in progress.
베타보관됨

1.8.5

  • Added a new Spectrum Analyser UI.
  • Added frequency blocking with common presets.
  • Changed the USB protocol to fix reliability issues introduced in iOS 26.
  • Added protection against invalid CRMX linking keys containing 0000.
  • Added persistent display of the CRMX linking key.
  • Improved the DMX console refresh rate.
  • Reduced settings save time.
  • Improved sACN and multicast reliability.
  • Improved USB reliability.
베타보관됨

1.8.1

  • Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
  • Added Bluetooth enable/disable control in the WebUI.
  • Improved reliability, especially when saving CRMX settings.

1.8.0

  • Added DMX merging (LTP, HTP, Prio).
  • Added an LED blinking pattern for DMX loss.
  • Made the sACN field editable on the Config page.

1.6.8

  • Improved linking key usability by storing it locally.
  • Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
  • Minor bug fixes.
  • Stability improvements.
안정 / 프로덕션

1.6.4

  • Added RF power control in the WebUI, in dB/mW.
  • Added an RF Spectrum Analyser.
  • Added a CRMX output toggle in the Spectrum tab.
  • Added UID support for a future RDM update.
  • Added a Help tab with a QR code linking to help.
  • Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
  • Disabled ‘Set as default gateway’ by default.
  • Shortened the device name so the full IP address is displayed on iOS devices.
  • Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
  • Bug fixes.

1.5.1

  • Fixed the linking key not clearing after being set in the WebUI.
  • Improved the Art-Net implementation.

1.5.0

  • Added linking key support and an option to set it in the WebUI.
  • Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
  • Bug fixes.

1.4.0

  • Added HW_0.6 support.
  • Updated the Art-Net name.
  • Improved the status LED behavior with Link and Unlink blinking patterns.
  • Added a button combination to reset the configuration.

1.3.3

  • Added an unlink confirmation pop-up in the WebUI.

1.3.2

  • Minor WebUI improvements.

1.3.1

  • Added a Help tab.

1.3.0

  • The LED now blinks when the link button is pressed.
  • Minor improvements.

1.2.0

  • Added Link and Unlink controls in the WebUI.
  • Added a configuration pop-up on compatible devices.

1.0.0

  • Initial public release.