베타보관됨
1.8.5
보관된 베타: 오래된 테스트 버전으로, 실제 현장 사용에는 권장하지 않습니다.
Cerise 1.8.5 beta · UF2 모든 Cerise 모델 · 4.09 MiB
SHA-256
f00faa125501ccbe89b5e5f2ca4e4d8076d61d9efb6dd1575708d5167648bb8dCERISE / FTS
다운로드
펌웨어와 문서를 한곳에서.
베타
테스트 버전입니다. 버그나 기능 저하가 있을 수 있으니 중요한 본 촬영이나 공연에는 사용하지 마세요.
진행 중인 베타 없음 — 보관된 버전
이 테스트 버전들은 안정 버전 1.8.11보다 이전 버전입니다. 참고용으로 보관하며, 업데이트용으로는 권장하지 않습니다.
안정 버전 사용 1.8.11베타보관됨
1.8.1
보관된 베타: 오래된 테스트 버전으로, 실제 현장 사용에는 권장하지 않습니다.
Cerise 1.8.1 beta · UF2 모든 Cerise 모델 · 4.10 MiB
SHA-256
7594bdef65da7669cce9b8366f5cbc95c3206803c958c67fa26094b5e6981344전체 변경 내역
버전별 변경 사항과 관련 글(있는 경우).
릴리스 노트는 영어로 제공됩니다. 확인되지 않은 날짜와 채널은 표시하지 않습니다.
안정 / 프로덕션
1.8.11
- Overhauled Art-Net and sACN protocol conformity:
- Per-port ArtPollReply.
- Persisted ArtAddress.
- Product-specific OEM IDs.
- Stricter sACN validation.
- CID-based merge tracking.
- Synchronization support.
- Fixed DHCP issues.
- Added DHCP hostname advertisement derived from the configured Cerise name.
- Changed the default merge mode for new and migrated slot patching from LTP to HTP.
- Changed the default USB IP address to 172.30.0.1.
- Restored the normal LED blinking pattern introduced in 1.8.1.
- Fixed channel blocking settings not being saved in 1.8.10.
- Many bug fixes.
- RDM remains a work in progress.
베타보관됨
1.8.5
- Added a new Spectrum Analyser UI.
- Added frequency blocking with common presets.
- Changed the USB protocol to fix reliability issues introduced in iOS 26.
- Added protection against invalid CRMX linking keys containing 0000.
- Added persistent display of the CRMX linking key.
- Improved the DMX console refresh rate.
- Reduced settings save time.
- Improved sACN and multicast reliability.
- Improved USB reliability.
베타보관됨
1.8.1
- Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
- Added Bluetooth enable/disable control in the WebUI.
- Improved reliability, especially when saving CRMX settings.
1.8.0
- Added DMX merging (LTP, HTP, Prio).
- Added an LED blinking pattern for DMX loss.
- Made the sACN field editable on the Config page.
1.6.8
- Improved linking key usability by storing it locally.
- Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
- Minor bug fixes.
- Stability improvements.
안정 / 프로덕션
1.6.4
- Added RF power control in the WebUI, in dB/mW.
- Added an RF Spectrum Analyser.
- Added a CRMX output toggle in the Spectrum tab.
- Added UID support for a future RDM update.
- Added a Help tab with a QR code linking to help.
- Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
- Disabled ‘Set as default gateway’ by default.
- Shortened the device name so the full IP address is displayed on iOS devices.
- Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
- Bug fixes.
1.5.1
- Fixed the linking key not clearing after being set in the WebUI.
- Improved the Art-Net implementation.
1.5.0
- Added linking key support and an option to set it in the WebUI.
- Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
- Bug fixes.
1.4.0
- Added HW_0.6 support.
- Updated the Art-Net name.
- Improved the status LED behavior with Link and Unlink blinking patterns.
- Added a button combination to reset the configuration.
1.3.3
- Added an unlink confirmation pop-up in the WebUI.
1.3.2
- Minor WebUI improvements.
1.3.1
- Added a Help tab.
1.3.0
- The LED now blinks when the link button is pressed.
- Minor improvements.
1.2.0
- Added Link and Unlink controls in the WebUI.
- Added a configuration pop-up on compatible devices.
1.0.0
- Initial public release.