CERISE / FTS

Descargas

El firmware y la documentación, en un solo lugar.

Beta

Versiones de prueba. Pueden contener errores y regresiones: no las utilice en una producción crítica.

No hay ninguna beta activa: versiones archivadas

Estas versiones de prueba antiguas son anteriores a la versión estable 1.8.11. Se conservan como referencia, no como actualizaciones recomendadas.

Usar la versión estable 1.8.11

BetaArchivada

1.8.5

Beta archivada: versión de prueba antigua, no recomendada para producción.

Cerise 1.8.5 beta · UF2 Todos los modelos Cerise · 4.09 MiB

SHA-256

f00faa125501ccbe89b5e5f2ca4e4d8076d61d9efb6dd1575708d5167648bb8d

BetaArchivada

1.8.1

Beta archivada: versión de prueba antigua, no recomendada para producción.

Cerise 1.8.1 beta · UF2 Todos los modelos Cerise · 4.10 MiB

SHA-256

7594bdef65da7669cce9b8366f5cbc95c3206803c958c67fa26094b5e6981344

Manual de usuario

La guía completa, con todos los capítulos, para consultar sin conexión.

PDF · Español Leer la guía en línea

Actualizar Cerise

Lea las instrucciones de actualización y compruebe la compatibilidad de su modelo antes de instalar. Los archivos de firmware se alojan directamente en este sitio.

Cómo actualizar

Historial completo de cambios

Los cambios de cada versión, con los artículos relacionados cuando existen.

Notas de versión en inglés. No se muestran fechas ni canales sin confirmar.

Estable / Producción

1.8.11

Overhauled Art-Net and sACN protocol conformity:
- Per-port ArtPollReply.
- Persisted ArtAddress.
- Product-specific OEM IDs.
- Stricter sACN validation.
- CID-based merge tracking.
- Synchronization support.
Fixed DHCP issues.
Added DHCP hostname advertisement derived from the configured Cerise name.
Changed the default merge mode for new and migrated slot patching from LTP to HTP.
Changed the default USB IP address to 172.30.0.1.
Restored the normal LED blinking pattern introduced in 1.8.1.
Fixed channel blocking settings not being saved in 1.8.10.
Many bug fixes.
RDM remains a work in progress.

BetaArchivada

1.8.5

Added a new Spectrum Analyser UI.
Added frequency blocking with common presets.
Changed the USB protocol to fix reliability issues introduced in iOS 26.
Added protection against invalid CRMX linking keys containing 0000.
Added persistent display of the CRMX linking key.
Improved the DMX console refresh rate.
Reduced settings save time.
Improved sACN and multicast reliability.
Improved USB reliability.

BetaArchivada

1.8.1

Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
Added Bluetooth enable/disable control in the WebUI.
Improved reliability, especially when saving CRMX settings.

1.8.0

Added DMX merging (LTP, HTP, Prio).
Added an LED blinking pattern for DMX loss.
Made the sACN field editable on the Config page.

1.6.8

Improved linking key usability by storing it locally.
Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
Minor bug fixes.
Stability improvements.

Estable / Producción

1.6.4

Added RF power control in the WebUI, in dB/mW.
Added an RF Spectrum Analyser.
Added a CRMX output toggle in the Spectrum tab.
Added UID support for a future RDM update.
Added a Help tab with a QR code linking to help.
Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
Disabled ‘Set as default gateway’ by default.
Shortened the device name so the full IP address is displayed on iOS devices.
Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
Bug fixes.

1.5.1

Fixed the linking key not clearing after being set in the WebUI.
Improved the Art-Net implementation.

1.5.0

Added linking key support and an option to set it in the WebUI.
Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
Bug fixes.

1.4.0

Added HW_0.6 support.
Updated the Art-Net name.
Improved the status LED behavior with Link and Unlink blinking patterns.
Added a button combination to reset the configuration.

1.3.3

Added an unlink confirmation pop-up in the WebUI.

1.3.2

Minor WebUI improvements.

1.3.1

Added a Help tab.

1.3.0

The LED now blinks when the link button is pressed.
Minor improvements.

1.2.0

Added Link and Unlink controls in the WebUI.
Added a configuration pop-up on compatible devices.

1.0.0

Initial public release.