CERISE / FTS

Downloads

Firmware e documentação, em um só lugar.

Beta

Versões de teste. Podem ter bugs e regressões: não use em uma produção crítica.

Nenhuma beta ativa: versões arquivadas

Estas versões de teste antigas são anteriores à versão estável 1.8.11. Elas ficam aqui como referência, não como atualizações recomendadas.

Usar a versão estável 1.8.11

BetaArquivada

1.8.5

Beta arquivada: versão de teste antiga, não recomendada para produção.

Cerise 1.8.5 beta · UF2 Todos os modelos Cerise · 4.09 MiB

SHA-256

f00faa125501ccbe89b5e5f2ca4e4d8076d61d9efb6dd1575708d5167648bb8d

BetaArquivada

1.8.1

Beta arquivada: versão de teste antiga, não recomendada para produção.

Cerise 1.8.1 beta · UF2 Todos os modelos Cerise · 4.10 MiB

SHA-256

7594bdef65da7669cce9b8366f5cbc95c3206803c958c67fa26094b5e6981344

Manual do usuário

O guia completo, com todos os capítulos, para consultar offline.

PDF · Português Ler o guia online

Atualizar o Cerise

Leia as instruções de atualização e verifique a compatibilidade do seu modelo antes de instalar. Os arquivos de firmware ficam hospedados diretamente neste site.

Como atualizar

Histórico completo de alterações

As mudanças de cada versão, com os artigos relacionados quando houver.

Notas de versão em inglês. Datas e canais não confirmados não são exibidos.

Estável / Produção

1.8.11

Overhauled Art-Net and sACN protocol conformity:
- Per-port ArtPollReply.
- Persisted ArtAddress.
- Product-specific OEM IDs.
- Stricter sACN validation.
- CID-based merge tracking.
- Synchronization support.
Fixed DHCP issues.
Added DHCP hostname advertisement derived from the configured Cerise name.
Changed the default merge mode for new and migrated slot patching from LTP to HTP.
Changed the default USB IP address to 172.30.0.1.
Restored the normal LED blinking pattern introduced in 1.8.1.
Fixed channel blocking settings not being saved in 1.8.10.
Many bug fixes.
RDM remains a work in progress.

BetaArquivada

1.8.5

Added a new Spectrum Analyser UI.
Added frequency blocking with common presets.
Changed the USB protocol to fix reliability issues introduced in iOS 26.
Added protection against invalid CRMX linking keys containing 0000.
Added persistent display of the CRMX linking key.
Improved the DMX console refresh rate.
Reduced settings save time.
Improved sACN and multicast reliability.
Improved USB reliability.

BetaArquivada

1.8.1

Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
Added Bluetooth enable/disable control in the WebUI.
Improved reliability, especially when saving CRMX settings.

1.8.0

Added DMX merging (LTP, HTP, Prio).
Added an LED blinking pattern for DMX loss.
Made the sACN field editable on the Config page.

1.6.8

Improved linking key usability by storing it locally.
Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
Minor bug fixes.
Stability improvements.

Estável / Produção

1.6.4

Added RF power control in the WebUI, in dB/mW.
Added an RF Spectrum Analyser.
Added a CRMX output toggle in the Spectrum tab.
Added UID support for a future RDM update.
Added a Help tab with a QR code linking to help.
Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
Disabled ‘Set as default gateway’ by default.
Shortened the device name so the full IP address is displayed on iOS devices.
Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
Bug fixes.

1.5.1

Fixed the linking key not clearing after being set in the WebUI.
Improved the Art-Net implementation.

1.5.0

Added linking key support and an option to set it in the WebUI.
Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
Bug fixes.

1.4.0

Added HW_0.6 support.
Updated the Art-Net name.
Improved the status LED behavior with Link and Unlink blinking patterns.
Added a button combination to reset the configuration.

1.3.3

Added an unlink confirmation pop-up in the WebUI.

1.3.2

Minor WebUI improvements.

1.3.1

Added a Help tab.

1.3.0

The LED now blinks when the link button is pressed.
Minor improvements.

1.2.0

Added Link and Unlink controls in the WebUI.
Added a configuration pop-up on compatible devices.

1.0.0

Initial public release.