FTS
ZH
EnglishFrançaisDeutschEspañolItalianoPortuguês日本語한국어简体中文العربيةहिन्दी
购买 Cerise

CERISE / FTS

下载

固件与文档，一站获取。

测试版

测试版本，可能存在错误或功能退化：请勿用于重要的正式演出或拍摄。

当前没有测试版 — 已归档版本

这些旧测试版本早于稳定版 1.8.11，仅供参考，不建议作为升级版本使用。

使用稳定版 1.8.11
测试版已归档

1.8.5

已归档的测试版：较旧的测试版本，不建议正式使用。

Cerise 1.8.5 beta · UF2 所有 Cerise 型号 · 4.09 MiB
SHA-256f00faa125501ccbe89b5e5f2ca4e4d8076d61d9efb6dd1575708d5167648bb8d
测试版已归档

1.8.1

已归档的测试版：较旧的测试版本，不建议正式使用。

Cerise 1.8.1 beta · UF2 所有 Cerise 型号 · 4.10 MiB
SHA-2567594bdef65da7669cce9b8366f5cbc95c3206803c958c67fa26094b5e6981344

用户手册

完整指南，涵盖所有章节，可离线阅读。

PDF · 简体中文 在线阅读指南

更新 Cerise

安装前请阅读更新说明，并确认您的型号是否兼容。固件文件直接托管在本网站。

如何更新

完整更新日志

每个版本的更新内容，以及相关文章（如有）。

更新说明为英文。未确认的日期和版本通道不予显示。

稳定版 / 正式版

1.8.11

  • Overhauled Art-Net and sACN protocol conformity:
    • Per-port ArtPollReply.
    • Persisted ArtAddress.
    • Product-specific OEM IDs.
    • Stricter sACN validation.
    • CID-based merge tracking.
    • Synchronization support.
  • Fixed DHCP issues.
  • Added DHCP hostname advertisement derived from the configured Cerise name.
  • Changed the default merge mode for new and migrated slot patching from LTP to HTP.
  • Changed the default USB IP address to 172.30.0.1.
  • Restored the normal LED blinking pattern introduced in 1.8.1.
  • Fixed channel blocking settings not being saved in 1.8.10.
  • Many bug fixes.
  • RDM remains a work in progress.
测试版已归档

1.8.5

  • Added a new Spectrum Analyser UI.
  • Added frequency blocking with common presets.
  • Changed the USB protocol to fix reliability issues introduced in iOS 26.
  • Added protection against invalid CRMX linking keys containing 0000.
  • Added persistent display of the CRMX linking key.
  • Improved the DMX console refresh rate.
  • Reduced settings save time.
  • Improved sACN and multicast reliability.
  • Improved USB reliability.
测试版已归档

1.8.1

  • Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
  • Added Bluetooth enable/disable control in the WebUI.
  • Improved reliability, especially when saving CRMX settings.

1.8.0

  • Added DMX merging (LTP, HTP, Prio).
  • Added an LED blinking pattern for DMX loss.
  • Made the sACN field editable on the Config page.

1.6.8

  • Improved linking key usability by storing it locally.
  • Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
  • Minor bug fixes.
  • Stability improvements.
稳定版 / 正式版

1.6.4

  • Added RF power control in the WebUI, in dB/mW.
  • Added an RF Spectrum Analyser.
  • Added a CRMX output toggle in the Spectrum tab.
  • Added UID support for a future RDM update.
  • Added a Help tab with a QR code linking to help.
  • Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
  • Disabled ‘Set as default gateway’ by default.
  • Shortened the device name so the full IP address is displayed on iOS devices.
  • Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
  • Bug fixes.

1.5.1

  • Fixed the linking key not clearing after being set in the WebUI.
  • Improved the Art-Net implementation.

1.5.0

  • Added linking key support and an option to set it in the WebUI.
  • Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
  • Bug fixes.

1.4.0

  • Added HW_0.6 support.
  • Updated the Art-Net name.
  • Improved the status LED behavior with Link and Unlink blinking patterns.
  • Added a button combination to reset the configuration.

1.3.3

  • Added an unlink confirmation pop-up in the WebUI.

1.3.2

  • Minor WebUI improvements.

1.3.1

  • Added a Help tab.

1.3.0

  • The LED now blinks when the link button is pressed.
  • Minor improvements.

1.2.0

  • Added Link and Unlink controls in the WebUI.
  • Added a configuration pop-up on compatible devices.

1.0.0

  • Initial public release.