CERISE / FTS

Downloads

Firmware und Dokumentation an einem Ort.

Beta

Testversionen. Fehler und Regressionen sind möglich: Nicht bei einer kritischen Produktion einsetzen.

Keine aktive Beta – archivierte Versionen

Diese älteren Testversionen stammen aus der Zeit vor der stabilen Version 1.8.11. Sie bleiben als Referenz verfügbar, nicht als empfohlene Updates.

Stabile Version verwenden 1.8.11

BetaArchiviert

1.8.5

Archivierte Beta – ältere Testversion, nicht für den Produktionseinsatz empfohlen.

Cerise 1.8.5 beta · UF2 Alle Cerise-Modelle · 4.09 MiB

SHA-256

f00faa125501ccbe89b5e5f2ca4e4d8076d61d9efb6dd1575708d5167648bb8d

BetaArchiviert

1.8.1

Archivierte Beta – ältere Testversion, nicht für den Produktionseinsatz empfohlen.

Cerise 1.8.1 beta · UF2 Alle Cerise-Modelle · 4.10 MiB

SHA-256

7594bdef65da7669cce9b8366f5cbc95c3206803c958c67fa26094b5e6981344

Benutzerhandbuch

Das vollständige Handbuch mit allen Kapiteln, auch offline.

PDF · Deutsch Handbuch online lesen

Cerise aktualisieren

Lesen Sie die Update-Anleitung und prüfen Sie vor der Installation die Kompatibilität Ihres Modells. Die Firmware-Dateien werden direkt auf dieser Website bereitgestellt.

So aktualisieren Sie

Vollständiges Änderungsprotokoll

Die Änderungen jeder Version, mit zugehörigen Artikeln, sofern vorhanden.

Versionshinweise auf Englisch. Unbestätigte Daten und Kanäle werden nicht angezeigt.

Stabil / Produktion

1.8.11

Overhauled Art-Net and sACN protocol conformity:
- Per-port ArtPollReply.
- Persisted ArtAddress.
- Product-specific OEM IDs.
- Stricter sACN validation.
- CID-based merge tracking.
- Synchronization support.
Fixed DHCP issues.
Added DHCP hostname advertisement derived from the configured Cerise name.
Changed the default merge mode for new and migrated slot patching from LTP to HTP.
Changed the default USB IP address to 172.30.0.1.
Restored the normal LED blinking pattern introduced in 1.8.1.
Fixed channel blocking settings not being saved in 1.8.10.
Many bug fixes.
RDM remains a work in progress.

BetaArchiviert

1.8.5

Added a new Spectrum Analyser UI.
Added frequency blocking with common presets.
Changed the USB protocol to fix reliability issues introduced in iOS 26.
Added protection against invalid CRMX linking keys containing 0000.
Added persistent display of the CRMX linking key.
Improved the DMX console refresh rate.
Reduced settings save time.
Improved sACN and multicast reliability.
Improved USB reliability.

BetaArchiviert

1.8.1

Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
Added Bluetooth enable/disable control in the WebUI.
Improved reliability, especially when saving CRMX settings.

1.8.0

Added DMX merging (LTP, HTP, Prio).
Added an LED blinking pattern for DMX loss.
Made the sACN field editable on the Config page.

1.6.8

Improved linking key usability by storing it locally.
Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
Minor bug fixes.
Stability improvements.

Stabil / Produktion

1.6.4

Added RF power control in the WebUI, in dB/mW.
Added an RF Spectrum Analyser.
Added a CRMX output toggle in the Spectrum tab.
Added UID support for a future RDM update.
Added a Help tab with a QR code linking to help.
Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
Disabled ‘Set as default gateway’ by default.
Shortened the device name so the full IP address is displayed on iOS devices.
Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
Bug fixes.

1.5.1

Fixed the linking key not clearing after being set in the WebUI.
Improved the Art-Net implementation.

1.5.0

Added linking key support and an option to set it in the WebUI.
Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
Bug fixes.

1.4.0

Added HW_0.6 support.
Updated the Art-Net name.
Improved the status LED behavior with Link and Unlink blinking patterns.
Added a button combination to reset the configuration.

1.3.3

Added an unlink confirmation pop-up in the WebUI.

1.3.2

Minor WebUI improvements.

1.3.1

Added a Help tab.

1.3.0

The LED now blinks when the link button is pressed.
Minor improvements.

1.2.0

Added Link and Unlink controls in the WebUI.
Added a configuration pop-up on compatible devices.

1.0.0

Initial public release.