CERISE / FTS

Downloads

Firmware e documentação, em um só lugar.

Estável / Produção

O canal recomendado para uso em produção. Verifique a compatibilidade do seu modelo antes de atualizar.

Estável / Produção

1.8.11

Versão mais recente deste canal

Cerise 1.8.11 · UF2 Todos os modelos Cerise · 4.32 MiB

SHA-256

4d44e108073011b20612cd438c5fe17fd50d12ec80e98c51e6ec19b3b9105881

Estável / Produção

1.6.4

Versão estável anterior

Cerise 1.6.4 · UF2 Todos os modelos Cerise · 1.87 MiB

SHA-256

3eafb396cce3955de30a0ed40b2e44051ab1594648cb8b327b37878d97807078

Manual do usuário

O guia completo, com todos os capítulos, para consultar offline.

PDF · Português Ler o guia online

Atualizar o Cerise

Leia as instruções de atualização e verifique a compatibilidade do seu modelo antes de instalar. Os arquivos de firmware ficam hospedados diretamente neste site.

Como atualizar

Histórico completo de alterações

As mudanças de cada versão, com os artigos relacionados quando houver.

Notas de versão em inglês. Datas e canais não confirmados não são exibidos.

Estável / Produção

1.8.11

Overhauled Art-Net and sACN protocol conformity:
- Per-port ArtPollReply.
- Persisted ArtAddress.
- Product-specific OEM IDs.
- Stricter sACN validation.
- CID-based merge tracking.
- Synchronization support.
Fixed DHCP issues.
Added DHCP hostname advertisement derived from the configured Cerise name.
Changed the default merge mode for new and migrated slot patching from LTP to HTP.
Changed the default USB IP address to 172.30.0.1.
Restored the normal LED blinking pattern introduced in 1.8.1.
Fixed channel blocking settings not being saved in 1.8.10.
Many bug fixes.
RDM remains a work in progress.

BetaArquivada

1.8.5

Added a new Spectrum Analyser UI.
Added frequency blocking with common presets.
Changed the USB protocol to fix reliability issues introduced in iOS 26.
Added protection against invalid CRMX linking keys containing 0000.
Added persistent display of the CRMX linking key.
Improved the DMX console refresh rate.
Reduced settings save time.
Improved sACN and multicast reliability.
Improved USB reliability.

BetaArquivada

1.8.1

Added persistent radio enable/disable handling so the wireless radio state survives reboots and power loss.
Added Bluetooth enable/disable control in the WebUI.
Improved reliability, especially when saving CRMX settings.

1.8.0

Added DMX merging (LTP, HTP, Prio).
Added an LED blinking pattern for DMX loss.
Made the sACN field editable on the Config page.

1.6.8

Improved linking key usability by storing it locally.
Fixed a bug where per-channel priority was treated as DMX data, causing the universe to flash.
Minor bug fixes.
Stability improvements.

Estável / Produção

1.6.4

Added RF power control in the WebUI, in dB/mW.
Added an RF Spectrum Analyser.
Added a CRMX output toggle in the Spectrum tab.
Added UID support for a future RDM update.
Added a Help tab with a QR code linking to help.
Added a reset button sequence: hold the boot button for 10 seconds until the LED turns purple, then press it briefly.
Disabled ‘Set as default gateway’ by default.
Shortened the device name so the full IP address is displayed on iOS devices.
Changed the default Ethernet network mask from 255.255.255.0 to 255.0.0.0.
Bug fixes.

1.5.1

Fixed the linking key not clearing after being set in the WebUI.
Improved the Art-Net implementation.

1.5.0

Added linking key support and an option to set it in the WebUI.
Added TimoTwo hardware and software revision details when hovering over its letter in the WebUI.
Bug fixes.

1.4.0

Added HW_0.6 support.
Updated the Art-Net name.
Improved the status LED behavior with Link and Unlink blinking patterns.
Added a button combination to reset the configuration.

1.3.3

Added an unlink confirmation pop-up in the WebUI.

1.3.2

Minor WebUI improvements.

1.3.1

Added a Help tab.

1.3.0

The LED now blinks when the link button is pressed.
Minor improvements.

1.2.0

Added Link and Unlink controls in the WebUI.
Added a configuration pop-up on compatible devices.

1.0.0

Initial public release.