Blackout Lighting Console

1. Plug-in your Cerise transmitter and disable Wi-Fi (this step is needed if you don't have the latest 2.3.6 update with the new Link Status tab)
2. Get your device IP address, for more details, refer to How to get my IP on iOS or read the sticker on the back of your Cerise

Go into Settings > Ethernet > Click on the device and copy the transmitter IP that looks like 169.254.XX.1 (if you only see an IP that ends in XX.2, just copy it and remember to change the 2 for a 1).

Remember to keep the settings on "Automatic" and do not try to set a static IP addres, it is not needed.

1. Go to your web browser, we recommend Chrome for better compatibility
2. Type-in your transmitter IP and press enter
3. Change your USB IP to the following 10.206.XX.1Press save and reboot Cerise, then exit the WebUI.
4. Open Blackout Lighting Console
5. Now navigate to your project, and in Link Status (top right)
6. Then select your favorite protocol, if you don't know what to pick, you can go with sACN. If you want slightly better stability you can switch to Art-Net Unicast and type in your new Cerise IP address from step 5.