Using Cerise with a Console

Diagram: three ways to connect Cerise to a DMX console over Ethernet: USB power with an Ethernet cable, a PoE injector, or a PoE switch

Cerise also works flawlessly with DMX consoles, just make sure you power it externally.

The Ethernet port uses DHCP by default, with a static fallback address of 2.0.0.101 when no DHCP lease is available. You can connect it directly to your console, wireless access point or home router; the controller must be on the same subnet as Cerise. Power Cerise externally using USB or compatible PoE. If you encounter DHCP issues, update the firmware.

Cerise CRMX over Wi-Fi: Art-Net & sACN router setup

Downloads Read all on one page